Crestron Wireless Presentation for iOS: Using the AirMedia App

If the instruction graphics in your classroom include one for "Screen Mirroring", please use that. It is much easier.

Example of screen mirroring instruction block with specific room info blocked out

If not, continue below.

 

If you have not already done so, please download the AirMedia App for your device.
- If your phone tells you that the app is not compatible with your phone - it is probably correct.

Open AirMedia

  1. Turn on the project system or monitor that you'll be presenting on
  2. Note the IP address and the 4-digit code on the room's projection screen/monitor
    • Example: Anderson 125 has an IP address displayed as Visit: http://10.16013.21. The IP address is the string of numbers after http://
      screenshot of display showing "visit: https://127.22.28.214" and "Code: 5777"
  3. In your AirMedia app on your device, enter the IP Address shown for your room and then tap the Present with AirMedia button.
    screenshot of app showing the box to enter the IP address
  4. The app will ask you if you want to Connect Using AirPlay – tap OK
  5. Tap Screen Mirroring in the iOS control panel
    screenshot of iOS Control Center showing Screen Mirroring option
  6. Tap on the IP Address of your room
  7. Enter the 4-digit code that is displayed on your room's projection screen or monitor. It should still be the same.

Disconnect

  1. Open Airplay/Screen Mirroring and tap Stop Mirroring
    screenshot of iOS Airplay box showing the option to Stop Mirroring
     
Was this helpful?
0 reviews
Print Article